How to use SADP

Using SADP tool

Step 1: Install the SADP Tool Application

Step 2: Make sure that the computer/laptop is in the same network as the IP Cameras/NVR/DVR.

Step 3: The SADP application will list the “Inactive” devices connected to the switch as shown in the figure below.



Step 4: Select the “Inactive” devices by checking the box next to the Device Type. Create a “New Password” and “Confirm password”

(Note: It is recommended to use the same password as the NVR)


Step 5: Click on “Confirm” to finish activating the devices.



Step 6: Click “Refresh” before proceeding with the step.

Step 7: Assigning Static IP Addresses to activated devices.

  • Select each device individually and input the desired IP Address 
  • Input the password
  • Click “Modify”
  • Repeat the steps for all the activated devices. The IP address has to be unique for each device.


    • Related Articles

    • SADP Tool for MAC

      Click here to download the SADP Tool for MAC.
    • SADP Tool for Windows

      Click here to download SADP for windows.
    • SADP Reset Process

         Reset Device password using SADP Tool (Note: Do not disconnect or power off the recorder or cameras till the process is finished) Download SADP Tool: https://app.box.com/s/mzbh5zeka0psff86gwqe0838pp6ym8bz Step 1: Select the desired device by ...
    • Find IP address of Hinovision IPC with SADP Tool in Local Network

      Find IP address of Hinovision IPC  With SADP Tool  in a Local Network? Hinovision IPC is compatible with not only NVR, also POE switch and regular switch. Before you configure the IPC, you need to identify the IP address of IPC you want to ...
    • SADP for MAC

      Click here to download SADP for MAC