Initialize/Setup SD Card from Guarding Vision App

Initialize/Setup SD Card from Guarding Vision App


 

 

 

 



                             SD Card Setup for IP Camera from Guarding Vision












Purpose:

This document provides instructions on how to initialize a brand new SD card that is inserted into the IP Camera. 

(Note: When a brand new SD Card is inserted into a IP Camera, it has to be initialized/formatted before it can start recording data)


Steps to Initialize/Format the SD card

Step 1: Open the app, Select ‘Guarding Vision’ on the bottom left and slide the device name to the left and select the icon.


Step 2: Once in the device settings page select ‘Storage Status’






Step 3: In the storage status page, select ‘Memory Card’, which will take you to the ‘Initialize Storage’ page.






Step 4: In the initialize storage page, select Initialize. This will format or initialize the sd card and the sd card should be ready for recording.





    • Related Articles

    • Guarding Vision Quick Setup

              Guarding Vision Setup Instructions Setting up the DVR/NVR Step 1: On the DVR/NVR screen, right click Select Menu  Configuration  Network. Step 2: Under “General” input the “Preferred DNS Server” as 8.8.8.8 as shown in the figure below.(If ...
    • Mini PTZ Setup and Motion Detection Recording on SD Card

      Enable Motion Detection and Motion Detection Recording on SD Card for IP Camera Purpose: This document provides steps to enable Motion detection recording on the Mini PTZ. Log into the camera from the web browser (Internet Explorer is preferred). To ...
    • Reset device with Guarding Vision

                    Reset NVR using Guarding Vision Purpose:  The purpose of this document is to be able to reset an NVR with the vuarding vision account. Currently Supported HINO devices:  NVR532P16-I4 NVR516P16-I4 NVR732-I8 NVR764-I8 Required Firmware:  ...
    • Add Stand alone device to Guarding Vision

                                               Adding a Stand Alone IP Camera to Guarding Vision App Step 1: Log in to the IP Camera with internet explorer and Go to Configuration  Network  Advanced Settings  Platform Access  Step 2: Check the “Enable ...
    • Guarding Vision setup for NVR/DVR/IP Camera - Complete Guide

      Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision The Following network settings must be checked before adding the device to Guarding vision App. Method 1: From NVR Local menu Step 1: Right Click on the NVR Monitor and select ...