Manual Reset for IP Camera

Manual Reset for IP Camera

Manually Reset the device to “Inactive” status



Step 1: Unplug the camera from the PoE or adapter power supply.

Step 2: Push the reset button down and plug in the power supply while holding the reet button down

Step 3: Continue holding the reset button for 30 seconds. The camera should be set to inactive.



    • Related Articles

    • IP Camera User Manual

      Network Camera User Manual Network PTZ Camera User Manual
    • Add Port Forwarded IP Camera to NVR

      Step 1: Access the camera using the “SADP Tool” application and assign a static IP address. Step 2: Login to the camera from browser(IE Preferred) with IP address and assign port numbers. To access the port page, go to Configuration --> Network ...
    • SADP Reset Process

         Reset Device password using SADP Tool (Note: Do not disconnect or power off the recorder or cameras till the process is finished) Download SADP Tool: https://app.box.com/s/mzbh5zeka0psff86gwqe0838pp6ym8bz Step 1: Select the desired device by ...
    • Access IP Camera Connected to NVR on SADP

              Access IP Camera from NVR on SADP   Purpose: This document provides steps to access the Plug and Play IP Camera from the NVR on the SADP. Connection Setup: Unplug the network connection from the LAN of the NVR and plug it into one of the PoE ...
    • Guarding Vision setup for NVR/DVR/IP Camera - Complete Guide

      Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision The Following network settings must be checked before adding the device to Guarding vision App. Method 1: From NVR Local menu Step 1: Right Click on the NVR Monitor and select ...