Guarding Vision Quick Setup

Guarding Vision Quick Setup


 

 

 

 

Guarding Vision Setup Instructions












Setting up the DVR/NVR

Step 1: On the DVR/NVR screen, right click Select Menu  Configuration  Network.

Step 2: Under “General” input the “Preferred DNS Server” as 8.8.8.8 as shown in the figure below.(If you have “Enable DHCP” and “Enable DNS DHCP” option on this page selected, then you do not have to perform this step)


Step 3: Select “Platform Access” and check “Enable” and create a verification code. Click “Apply”.


(Note: The QR code displayed on the platform access page can be used to add the device into the guarding vision app.)








Adding the device on Guarding Vision App.

Step 1: Tap on the “+” to add a new device. Select "Scan QR Code" to scan the QR code being displayed on the NVR monitor. Input the Verification Code that was created under "Platform Access" in the NVR.






Step 3: For Manual Adding, input the “Serial No”. For QR code, Scan the QR code from the device sticker or the QR code displayed on the NVR. (Note: You can also scan the QR Code you see on the monitor. Refer to Step 3)


(For more support please call HINO technical support at 469-444-2999)

                                               www.hinovision.com                                  Office:  469-444-2999




    • Related Articles

    • Initialize/Setup SD Card from Guarding Vision App

                                           SD Card Setup for IP Camera from Guarding Vision Purpose: This document provides instructions on how to initialize a brand new SD card that is inserted into the IP Camera.  (Note: When a brand new SD Card is ...

    • Guarding Vision setup for NVR/DVR/IP Camera - Complete Guide

      Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision The Following network settings must be checked before adding the device to Guarding vision App. Method 1: From NVR Local menu Step 1: Right Click on the NVR Monitor and select ...

    • Reset device with Guarding Vision

                    Reset NVR using Guarding Vision Purpose:  The purpose of this document is to be able to reset an NVR with the vuarding vision account. Currently Supported HINO devices:  NVR532P16-I4 NVR516P16-I4 NVR732-I8 NVR764-I8 Required Firmware:  ...

    • Guarding vision Setup from browser (www guardingvision com)

      Step 1: Open browser (Internet explorer/Chrome) and input the address www.guardingvision.com. And click on “Register” to register for a new account.  Step 2: In the registration page, input the mandatory credentials and select “Email” for registering ...

    • Guarding Vision for MAC

      Please download Guarding Vision for MAC from the link below https://drive.google.com/file/d/1LYzro4l5PpYrp3HLzv2Xl-04duFW8LMU/view?usp=share_link