Access IP Camera Configuration From NVR
To be able to access IP cameras connected to an NVR from the NVRs web client.
Note: Before we start make sure the computer and the NVR are in the same network
Enable the virtual host:
- Open internet explorer.
- Input the IP address of the NVR into the address bar. You should be able to see the following page:
- Input the User Name and Password. Click on “Login”. Now, the following page will be displayed:
- Go to Configuration Advanced Other Check “Enable Virtual Host” Click “Save”. Please refer to the figure below:
Follow the steps below to see if the setting was successfully performed:
Go to ‘Configuration’ ‘Camera Management’. The links for accessing the IP camera will be shown as follows: