Access IP Camera Web Interface from NVR

Access IP Camera Web Interface from NVR

Access IP Camera Web Interface from NVR Web Interface

 

Step 1: Connect the NVR to the router or network switch.

Step 2: Connect your PC/MAC to the same network as the NVR.

Step 2: Find the IP address of the NVR. This can be done following ways:

-        - Connect your PC/MAC to the same network as the NVR

-        - Run the SADP Tool application. SADP will show the device name with IP address.

-       - On the local menu, go to System --> Network --> IPV4

Step 3: Open the browser and input the NVR IP address. This will take you to the NVRs web interface.

Step 4: Login to NVR and go to Configuration --> Network --> Advanced settings --> Other --> Check the box for “Enable Virtual host” --> Save.

Step 5: Go to System --> Camera Management --> Click the blue link under “Join” to login to the camera directly.



    • Related Articles

    • How to access NVR web interface

      How to Access NVR Web Interface May. 25th, 2018 Ver.1.0 You can access NVR/DVR web interface and perform live view, play back and configuration. To access the web interface, please follow the steps listed bleow: Go to NVR menu and then configuration ...

    • Access IP Camera Configuration from NVR Web GUI

              Access IP Camera Configuration From NVR   Purpose: To be able to access IP cameras connected to an NVR from the NVRs web client. Note: Before we start make sure the computer and the NVR are in the same network Enable the virtual host: Open ...

    • Access IP Camera Connected to NVR on SADP

              Access IP Camera from NVR on SADP   Purpose: This document provides steps to access the Plug and Play IP Camera from the NVR on the SADP. Connection Setup: Unplug the network connection from the LAN of the NVR and plug it into one of the PoE ...

    • Guarding Vision setup for NVR/DVR/IP Camera - Complete Guide

      Network Setup for NVR/DVR/IP Camera before adding to Guarding Vision The Following network settings must be checked before adding the device to Guarding vision App. Method 1: From NVR Local menu Step 1: Right Click on the NVR Monitor and select ...

    • Add Port Forwarded IP Camera to NVR

      Step 1: Access the camera using the “SADP Tool” application and assign a static IP address. Step 2: Login to the camera from browser(IE Preferred) with IP address and assign port numbers. To access the port page, go to Configuration --> Network ...